- 油基鉆井液產品
- 水基鉆井液產品
- 固井產品
- 堵漏產品
- 其他產品
產品中心
FIBSEAL 高韌性纖維堵漏劑 High-Toughness Fiber Leak Sealer
簡介Introduction
FIBSEAL高韌性纖維是一種具有一定強度的惰性纖維材料，結構上，該纖維中部為空心狀態，粗細分布不均勻，纖維表面有較多微細凹槽，在漏失時，易于流入裂縫中，不產生封門，同時吸附堵漏漿中其他固相，從而在縫內形成較好的封堵。
FIBSEAL high-toughness fiber is an inert fibrous material with a certain degree of strength. Structurally, the fiber has a hollow center, an uneven thickness distribution, and numerous fine grooves on its surface. During leakage, these fibers easily flow into the fractures without causing blockage at the entrance. Simultaneously, they adsorb other solid phases in the leak-sealing slurry, thereby forming an effective seal within the fractures.
性能及優點Performance and advantages
l 推薦加量：0.2~2.0%；
l 其抗溫性較好，抗溫達到200℃以上；
l 易于侵入裂縫，以免封門，能吸附固相，促進封堵屏障的形成。
l Recommended dosage: 0.2-2.0%;
l It exhibits good temperature resistance, capable of withstanding temperatures above 200℃;
l It easily penetrates into fractures without causing blockage at the entrance, and can adsorb solid phases to facilitate the formation of a sealing barrier.
技術參數Technical Parameters
項目Item | 技術指標Technical Index |
外觀Appearance | 細長纖維狀slender and fibrous |
單絲直徑Monofilament Diameter（μm） | 5.0-7.0 |
抗拉強度Tensile Strength（GPa） | 3.5-4.9 |
抗拉強度模量Tensile Modulus（GPa） | 230.0-430.0 |
包裝Packaging
采用三合一復合牛皮紙袋包裝，內襯防水塑料薄膜，可根據用戶需求提供50kg、25kg兩種分裝規格。
The product is packaged in triple-layer composite kraft paper bags with waterproof plastic film liners, and is available in two packaging specifications: 50kg and 25kg, according to customer requirements.